Ytterbium-doped fiber amplifier (YDFA) generates gain by pumping ytterbium-doped fiber with a semiconductor laser to amplify laser signals in the 1030~1100nm band, Hi1060 single-mode fiber or PM980 polarization-maintaining fiber output, the output power is continuously adjustable, with high gain and low The advantages of noise. The desktop YDFA is convenient for experimental operation, and the user can adjust the pump current and output power through the buttons on the front panel.
Optical Parameter |
Unit |
Typical Values |
Remark |
Wavelength Range |
nm |
1030~1100nm |
|
Input Power |
dBm |
0~+10 |
Customizable |
Saturated output power |
dBm |
17/20/23/25/26/27/30/33 |
|
Noise Figure |
dB |
5.0 |
|
Gain Flatness |
dB |
3 |
|
Polarization Dependent Gain |
dB |
<0.3 |
|
Polarization Mode Dispersion |
ps |
0.5 |
|
Input/output Isolation |
dB |
>30 |
|
Fiber Type |
- |
HI1060 or PM980 panda |
1.0m length |
Optical Connector |
- |
FC/APC |
|
Control Mode |
- |
Automatic current control (ACC) / Automatic power control (APC) |
*Note 1 |
Electrical and environmental parameters |
Desktop |
Module |
Control Mode |
Button |
RS232 |
Communication Interface |
* Optional (DB9 optional host computer software) |
DB9 Female |
Power Supply |
100~240V AC, <30W |
5V DC, <15W |
Dimensions |
260(W)×280(D)×120(H)mm |
125(W)×150(D)×20(H)mm |
Operation Temperature Range |
-5~+55°C |
|
Operation Humidity Range |
0~70% |
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better.
① |
② |
③ |
④ |
YDFA |
Output power(dBm) |
Fiber Type |
Package Type |
|
17/20/23/25/26/27/30/33 |
SM: HI1060 SM fiber PM: PM980 Panda fiber |
M: Module B: Desktop |
If you need to customize other specifications, please provide detailed description for your requirement.