DK Photonics' 1064nm Polarization Maintaining Tap Coupler/Isolator Hybrid Combination is a combination of a wavelength division multiplexer, tap coupler and an isolator in a compact package. All input and output fibers are polarization maintaining. This product has an extremely low insertion loss, a very stable tap-coupling ratio, high isolation, and high return loss. This product offers integrated solution to amplifier application by combining more functions into a very compact package.
Performance Specifications
|
Parameter
|
Unit
|
Values
|
|
Stage of Isolator
|
-
|
Single Stage
|
|
Signal Central Wavelength (λ c)
|
nm
|
1064
|
|
Signal Wavelength Range
|
nm
|
+/-5
|
|
Max. Signal Excess Loss, λ c, @ 23℃
|
dB |
2.2
|
|
Min. Signal Isolation, λ c, @ 23℃(Isolator)
|
dB |
32
|
|
Tap Ratio
|
%
|
1~50
|
|
Tap Channel Typ. Loss
|
dB
|
19.0~21.5(1% tap)
|
|
Min. Extinction Ratio @ 23℃
|
dB
|
Type B: 20, Type F: 22
|
|
Min. Return Loss
|
dB
|
50
|
|
Max. Power Handling (CW)
|
mW
|
200
|
|
Max. Peak Power for Pulse
|
kW
|
1, 5,10
|
|
Max. Tensile Load
|
N
|
5
|
|
Fiber Type
|
-
|
PM980-XP fiber or specified
|
|
Operating Temperature
|
℃
|
-5 to +70
|
|
Storage Temperature
|
℃
|
-40 to +85
|
|
Package Dimensions
|
mm
|
Ø5.5 x L35
|
- Above specifications are for device without connector.
- For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Power transmits through the connector less than 2W.
- Type B: Both axis working, Type F: Fast axis blocked, the default is Type B if without request.
- For this 1064nm Isolator, Due to high IL, it is recommended to use average power of <200mW for 1064nm. If you need higher handle power, please look for our TGG based High power isolator.
- If there is pulse application, please be sure to inform us of pulse energy and peak power.
- If you have questions about the axial direction, please contact us.
Package Dimension
PS: If Tap port is on the input side (Backward Tap), Tap is both axis working. If Tap port is on the Output side (Forward Tap), it is fast axis blocked, slow axis working. The default tap is on the input side.
Order information
P/N:PMTIH-S/D-①-②-③-④-⑤-⑥-⑦-⑧ (S:Single Stage, D:Dual Stage)
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
|
①
|
②
|
③
|
④
|
⑤
|
⑥
|
⑦
|
⑧
|
|
Wavelength
|
Tap Ratio
|
Optical Power
|
Tap Configuration
|
Axis alignment
|
Pigtail Diameter
|
Fiber Length
|
Connector
|
|
64:1064nm
|
01:1% Tap
02:2% Tap
05:5% Tap
|
L: Refer to the above table
|
F: Forward Tap
B: Backward Tap
|
F: Fast axis blocked, Slow axis working
B: Both of axis working
|
25:250μm bare fiber
90:900μm Loose Fiber
XX: Others
|
08:0.8m
10:1.0m
15:1.5m
XX: Others
|
00: None
FP: FC/PC
FA: FC/APC
SP: SC/PC
SA: SC/APC
XX: Others
|
Part Number Example: PMTIH-S-64-01-L-F-F-90-10-FA
Description: Polarization Maintaining Tap Coupler/Isolator Hybrid Combination, 1064nm signal Wavelength,1% Forward tap, and Fast axis blocked, Slow axis working, with 0.9mm OD loose tube, 1.0m fiber length, and FC/APC connectors at all ports.
Ordering Information for Custom Parts:
If you need to customize other specifications, please provide detailed description for your requirement.
DownloadDatasheet in PDF