The 1030nm Polarization Beam Combiner/Splitter can be used either as a polarization beam combiner to combine light beams from two PM input fibers into a single output fiber, or as a polarization beam splitter to split light from an input fiber into two output fibers of orthogonal polarization states.
DK Photonics offers a large selection of PBS/C. These devices can handle powers rang from 300mW to 100W or other on request and have center operating wavelengths ranging from 500 nm to 2050nm.
If you do not see a standard Polarization Beam Combiner/Splitter that meets your needs, we welcome the opportunity to review your desired specification and quote a custom Polarization Beam Combiner/Splitter. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.
Performance Specifications
|
Parameter
|
Unit
|
Value
|
|
Grade
|
-
|
P
|
|
Operating wavelength
|
nm
|
1030
|
|
Operating bandwidth
|
nm
|
±20
|
|
Insertion loss
|
Typ.
|
dB
|
0.60
|
|
Max.
|
dB
|
1.00
|
|
Min. Extinction Ratio(for PBS only)
|
dB
|
20
|
|
Return loss
|
dB
|
>50
|
|
Directivity
|
dB
|
>50
|
|
Max. Power Handling
|
W
|
0.5, 1, 2, 3, 5, 10, 20
|
|
Tensile Load
|
N
|
< 5
|
|
Fiber Type
|
Port 3&Port 4
|
-
|
PM980-XP
|
|
Port 1&Port2 (Same Fiber or Corresponding SM Fiber)
|
-
|
1060-XP, or PM980-XP
|
|
Operating temperature
|
℃
|
-5 ~ +70
|
|
Storing temperature
|
℃
|
-40 ~ +85
|
|
Package dimension
|
mm
|
14x12x8
|
- Above specifications are for device without connector. All parameters are tested at room temperature.
- For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Power transmits through the connector less than 2W.
- For >20W high power applications, we will use heat sink package, contact DK Photonics for details.
- Since the light is bidirectionally reversible, PBC can also be used as PBS.
Package Dimension
PS:
- Optical Path: Port 1 Input, Port 3 /Port 4 output, Port 3 Panda fiber is aligned to P1; Port 2 Input, Port 3/Port 4 output, Port 4 Panda fiber is aligned to port 2.
- Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.
Order information
P/N: PBC/PBS-2x2-①-②-③-④-⑤-⑥-⑦
When you inquire, please provide the correct P/N number according to our ordering information and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
| ① |
② |
③ |
④ |
⑤ |
⑥ |
⑦ |
| Grade |
Operating Wavelength |
Power Handling (Total) |
Fiber type (Port1&2) |
Pigtails Diameter |
Fiber Length |
Connector |
| P:P grade |
30:1030nm
XX: Others
|
L:<0.5W
1:1W
2:2W
5:5W
10:10W
|
06X:1060-XP fiber
P98X:PM980-XP fiber
|
25:250μm
90:900μm
XX: Others
|
08:0.8m
10:1.0m
XX: Others
|
00: None
FP: FC/PC
FA: FC/APC
XX: Others
|
Part Number Example: PBS-2X2-P-30-L-P98X-25-10-00
Description: 1030nm 2X2 Polarization Beam Splitter, 0.5W power, P grade, P980-XP fiber at port 1&2, with bare fiber, 1.0m fiber length, and no connectors at all ports.
Ordering Information for Custom Parts:
If you need to customize other specifications, please provide detailed description for your requirement.
DownloadDatasheet in PDF