• About Us
  • News & Events
Contact Us

Product

                   

Fiber Amplifier

Products

Erbium-doped Fiber Booster Amplifier for L-band

The L-band erbium-doped fiber amplifier is a series of optical power amplifier products dedicated to fiber laser or fiber communication systems. The working wavelength covers 1570~1603 nm, and it has the advantages of high gain and low noise.

Features

  • Covering L band
  • High gain
  • High output power

Applications

  • Fiber Communications
  • Fiber Laser
  • Fiber Sensors

Performance Specifications

Optical Parameter Unit Typical Values Remark
Wavelength Range nm 1570~1605 L-band
Input Power dBm -6~+3  
Saturated output power dBm 15/17/20/23/25/26 @-3dBm input
Noise Figure dB 5.0 @-3dBm input
Polarization extinction ratio (PER) dB – ≥23  
Polarization Dependent Gain dB ≤0.3 –  
Polarization Mode Dispersion ps 0.5 –  
Input/output Isolation dB >35  
Optical power monitoring – Output optical power monitoring  
Fiber Type – SMF-28e PM1550 1.0m length
Optical Connector – FC/APC only for low power test
Working mode – Automatic current control (ACC) /

Automatic power control (APC)

 *Note 1

 

Electrical and environmental parameters Desktop Module
Control Mode Button/ RS232 RS232
Communication Interface DB9 Female DB9 Female
Power Supply 100~240V AC, <30W 5V DC, <15W
Dimensions 260(W)×280(D)×120(H)mm 125(W)×150(D)×20(H)mm
Operation Temperature Range -5~+35°C
Operation Humidity Range 0~70%

*Note 1:

  • ACC mode: Automatic current control: the EDFA pump working current is set by the user and automatically locked by the EDFA to achieve a constant pump current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is applicable to all EDFA models.
  • APC mode: Automatic power control mode, where the user sets the signal light output power of the EDFA. Based on the output power monitored by the PD, the EDFA automatically controls and adjusts the pump current to achieve stable output signal. In APC mode, the user can adjust the output power within a range of 10% to 100% of the maximum output power. The advantage of APC mode is that when the input optical power fluctuates, EDFA will minimize the fluctuation of output power as much as possible

Package Dimension

Ordering Information

P/N: ①-②-③-④-⑤-⑥

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better.

① ② ③ ④ ⑤ ⑥
EDFA Operation Wavelength Amplifier type Output power(dBm) Fiber Type Package Type
  L: L-band BA: Booster Amplifier 15/17/20/23/25/26 SM: SMF-28e

PM: PM1550

 M: Module

B: Desktop

Ordering Information for Custom Parts:

If you need to customize other specifications, please provide detailed description for your requirement.