• About Us
  • News & Events
Contact Us

Product

                   

Fiber Amplifier

Products

High Power Single-Mode Erbium-doped Fiber Amplifier for C-band

DK Photonics High-power single-mode erbium-doped fiber amplifier (EYDFA-HP) is based on the principle of laser amplification of optical signals in erbium-doped fiber, using unique multi-stage optical amplification design and reliable high-power laser heat dissipation technology to achieve the wavelength range of 1535~1565nm Internal high-power laser output. It has the advantages of high power and low noise, and can be used for optical fiber communication, laser radar, etc.

Features

  • High output power
  • High Gain
  • Wide wavelength range

Applications

  • Fiber Communications
  • Fiber Laser
  • Fiber Sensors

Performance Specifications

Optical Parameter Unit Typical Values Remark
Wavelength Range nm 1535~1565nm  
Input Power dBm -6~+10  
Standby protection input power dBm ≤-10  
Saturated output power dBm 27/30/33/35/37/40 @-3dBm input
Adjustable range of output power – 10%~100%  
Noise dB <6.0 @-3dBm input
Uneven gain wavelength dB ≤1 @Different wavelengths
Polarization Dependent Gain dB ≤0.5  
Polarization Mode Dispersion ps 0.5  
Input/output Isolation dB >35  
Optical power monitoring – Intput optical power monitoring; Output optical power monitoring  
Fiber Type – SMF-28e 1.0m length
Optical Connector – FC/APC only for low power test
Working mode – ACC/APC/AGC(37/40dBm without AGC) *Note 1

 

Electrical and environmental parameters Desktop Module
Control Mode Touch screen/ RS232 RS232
Communication Interface DB9 Female DB9 Female
Power Supply 100~240V AC, <150W 12V DC, <60W
Optical power (dBm) 27/30/33/35 37/40 27/30/33/35 37/40
Dimensions(mm) 255(W)×322(D)×115(H) 376(W)×340(D)×112(H) 125(W)×150(D)×21.5(H) 125(W)×150(D)×31.5(H) 139(W)×235(D)×70(H)
Cooling method Internal air cooling Internal air cooling Contact heat dissipation Internal air cooling Internal air cooling
Operation Temperature Range -5~+35°C
Operation Humidity Range 0~70%

*Note 1:

  • ACC mode: Automatic current control: the EDFA pump working current is set by the user and automatically locked by the EDFA to achieve a constant pump current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is applicable to all EDFA models.
  • APC mode: Automatic power control mode, where the user sets the signal light output power of the EDFA. Based on the output power monitored by the PD, the EDFA automatically controls and adjusts the pump current to achieve stable output signal. In APC mode, the user can adjust the output power within a range of 10% to 100% of the maximum output power. The advantage of APC mode is that when the input optical power fluctuates, EDFA will minimize the fluctuation of output power as much as possible
  • AGC mode: Automatic gain control mode, in which the user sets the gain coefficient of EDFA. EDFA will automatically control and adjust the pump current based on the input and output power detected by PD to achieve the most stable gain multiple. When the input optical power fluctuates, the output power will also fluctuate accordingly, but the gain coefficient is generally stable.

Package Dimension

Ordering Information

P/N: ①-②-③-④-⑤-⑥

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better.

① ② ③ ④ ⑤ ⑥
EDFA Operation Wavelength Amplifier type Output power(dBm) Fiber Type Package Type
  C: C-band HP-BA: High power BA amplifier 27/30/33/35/37/40 SM: SMF-28e M: Module

B: Desktop

Ordering Information for Custom Parts:

If you need to customize other specifications, please provide detailed description for your requirement.