Month: August 2017

Combining the Multiplexer and Demultiplexer into One!

As advancements in technology take place, the need for faster data transmission emerges. Often, continuing with the old equipment results in major losses. If you have been fed up of the existing data transfer speeds at your place, it is certainly the time when you should look out for change. And not just change, a solution which is cost effective, of the best quality and the best service should always be your goal.

CWDM Mux and DeMux Module
CWDM Mux and DeMux Module

DK Photonics Technology Limited is one of the leading companies in designing and manufacturing of high quality optical passive components, which includes a large array of fiber-optic components. You can count on them to get the best solution for your everyday problems. They have brought the advantages of both the multiplexer, which is multi input and single output device and the demultiplexer, which is a single input and multiple output device, into one product. It has eradicated the need for having both the products separately.

About our CWDM Mux and DeMux Module:

For industries employing multiplexer and demultiplexer for telecommunication, fiber sensor and fiber laser applications such as line monitoring, networking, cellular communications, optical amplifiers etc. DK Photonics CWDM MUX+DEMUX Module is an ideal choice. It supports wavelengths between 1270nm to 1610nm in 20nm increments, allowing different services up to 10Gbps to be transported across the same fiber link. It is the latest product that offers a competitive advantage to the industry using it.

The features of CWDM Mux+DeMux Module are:

  • Low insertion loss
  • Wide pass band
  • High channel isolation
  • High stability and reliability
  • Epoxy free on optical path

With so many advanced features, it surely is going to beat the obsolete products. The module combines the need for a multiplexer and demultiplexer into one product. Besides, minimizing the number of wires that are required for the multiple transmissions, the information is multiplexed over a single high data rate link, and then demultiplexed at the other end, along a single communication channel. That is what makes it a more sought after choice.

If you intend to increase your data transfer needs with the optical Mux+DeMux module, you are just a few a steps away. Get a Mux+DeMux module for your industry and connect the data line is to the output line. Enjoy the difference!

Our contact and support:

We are always reachable at the following destinations:

  • Website: http://www.dkphotonics.com
  • E-mail: [email protected]
  • Tel:+86-755-36820366
  • Fax:+86-755-26746512
  • Add: DK Photonics Technology Limited
    7/F, Bldg. C, Qinghu Technology Park
    Qingxiang Rd., Longhua New Dis.
    Shenzhen, Guangdong, China 518109

 

In-Line Polarizer is up for Grab Now at Best Low Price!

A polarizer is an optical filter which is used to pass light waves of a specific polarization blocking other light waves. The In-Line Polarizer is used for converting un-polarized light into polarized light having the high extinction ratio. What does the polarizer do specifically? The light wave of a specific polarization at slow or fast axis is passed effectively and the other waves are blocked. So use of it in fiber lasers, amplifiers, and communication system helps in the better maintenance of the system. DK Photonics is one such company who explicitly deals with the supply of high power products.

Company Profile

DK Photonics Technology Limited is the company headquartered in Shenzhen, China with factories located in varied locations. The company has expertise in designing and manufacturing of high-quality optical components for telecommunication, sensors, and applications. The company has the experience in fiber-optic design & installation which also includes setup of transmission systems and assemblies. Total care for quality service is taken and the company has passed RoHS certification & ISO9001 quality system.

In-line Polarizer USA
In-Line Polarizer USA

The company deals in customized components which production of filter based multiplexers, coupler modules, switching modules and fiber components. Cost effective products are used over multiplexers or amplifiers.  One of the clients quoted the statement as, “We are satisfied with the cost effective fiber optic solutions provided by DK Photonics”.

Optical Fiber In-Line Polarizer and its Specifications

This device is a tiny part which is important for efficient working of the electronic product and this low-cost device converts the un-polarized light into linear polarized light. The device can be connected using input/output connector in the optical system.

Here are the striking features of In-line Polarizer –

Light weight and compactness: It is a light weight device which is easy to carry and it helps in the execution of the appliance.

High return loss: The loss of power in signal reflected by a discontinuity in optical fiber results in high return loss.

Low insertion ratio: Insertion cost is the loss of signal power from the insertion of a device into the optical fiber and it is much less than other devices.

High extinction ratio: It means that ratio of the optical power level of a digital signal produced from an optical source.

High stability: The tiny device is quite stable and reliable. It is one of the most trusted devices to be used on optical fibers.

DK Photonics provides a product which is best for communication purposes at low rates. So, the company builds High Power Isolator, 1064nm Components, PM Components, Pump Combiner and much more. Integrated service is provided to the clients with in-house installation setup at the industry location. All description to all products is provided over the website with updates of the latest components. Online payment service is available with easy booking and delivery of services. Get the best prices on the products like no other company.

Combining the Multiplexer and Demultiplexer into One

As advancements in technology take place, the need for faster data transmission emerges. Often, continuing with the old equipment results in major losses. If you have been fed up of the existing data transfer speeds at your place, it is certainly the time when you should look out for change. And not just change, a solution which is cost effective, of the best quality and the best service should always be your goal.

D K Photonics Technology Limited is one of the leading companies in designing and manufacturing of high quality optical passive components, which includes a large array of fiber-optic components. You can count on them to get the best solution for your everyday problems. They have brought the advantages of both the multiplexer, which is multi input and single output device and the demultiplexer, which is a single input and multiple output device, into one product. It has eradicated the need for having both the products separately.

About our CWDM Mux and DeMux Module:

For industries employing multiplexer and demultiplexer for telecommunication, fiber sensor and fiber laser applications such as line monitoring, networking, cellular communications, optical amplifiers etc. DK Photonics CWDM MUX+DEMUX Module is an ideal choice. It supports wavelengths between 1270nm to 1610nm in 20nm increments, allowing different services up to 10Gbps to be transported across the same fiber link. It is the latest product that offers a competitive advantage to the industry using it.

The features of CWDM Mux+DeMux Module are:

  • Low insertion loss
  • Wide pass band
  • High channel isolation
  • High stability and reliability
  • Epoxy free on optical path

With so many advanced features, it surely is going to beat the obsolete products. The module combines the need for a multiplexer and demultiplexer into one product. Besides, minimizing the number of wires that are required for the multiple transmissions, the information is multiplexed over a single high data rate link, and then demultiplexed at the other end, along a single communication channel. That is what makes it a more sought after choice.

If you intend to increase your data transfer needs with the optical Mux+DeMux module, you are just a few a steps away. Get a Mux+DeMux module for your industry and connect the data line is to the output line. Enjoy the difference!

Our contact and support:

We are always reachable at the following destinations:

  • Website: http://www.dkphotonics.com
  • E-mail: [email protected]
  • Tel:+86-755-36820366
  • Fax:+86-755-26746512
  • Add: DK Photonics Technology Limited

7/F, Bldg. C, Qinghu Technology Park

Qingxiang Rd., Longhua New Dis.

Shenzhen, Guangdong, China  518109